![Picture](/uploads/1/0/2/0/10200590/4159089.jpg)
The two walls we needed to cover form a inside corner. The wall to the left I have recessed a cabinet that will be our coat closet into the upper section of the wall.
This is were the fun begins I took a couple of sheets of Maple plywood and engraved a tree pattern into the surface, (as seen in the attached shot.)
![Picture](/uploads/1/0/2/0/10200590/8830499.jpg)
Here you can see the door panel that is the coat closet. The shot below is what these will look like with the finish on them.